DTF Transfers 👉 Click here to view all designs

PRESSING INSTRUCTIONS FOR DTF TRANSFERS:

Pre-Press Garment for 5 seconds to get out any moisture
Temp: 325-350°F
Pressure: Heavy  (if print doesn't stick, this is likely the biggest reason why.  Make sure your press is on heavy pressure!)
Time: 10-30 Seconds
Peel: Hot

• Do not use butcher paper or any cover over this transfer when pressing
• A commercial grade heat press is highly recommended (no iron, Cricut EasyPress)

TRANSFER STILL NOT ADHERING? TRY THESE ADDITIONAL TIPS

1. Lightly lift the transfer at the corner to see if the design adheres, if not, increase the temperature by 5-10  degrees and repress for 10- 30 seconds. Continue this until you find your sweet spot.

2. Don't press over a raised neckline, this can cause an uneven press.

3. Pressing pillows can assist in providing an even press.

4. Investing in a heat gun will let you know if your heat press is heating up evenly.

*Please note the time and temp are suggested and you may have to adjust based on your own presses best settings.